Launch X-431 PAD V User Manual page 77

LAUNCH
External trigger signal
6 External trigger
Scopebox failed to trigger the signal itself.)
Connect to the diagnostic tool via data
B-shaped data I/
7 cable so that the signal can be displayed on
O port
the tool.
To provide power to it via the power adapter
8 Power interface
or battery clamps cable.
Communication
9 It blinks in process of data communication.
indicator
It remains steady green after the Scopebox
10 Running LED
is running.
It keeps solid red after the Scopebox is
11 Power LED
powered on.
7.3.2.2 Scopebox accessories
The Scopebox includes the auto test leads, secondary pickup cable
for 4-channel oscilloscope, crocodile clips for 4-channel oscilloscope,
etc. See the packing list attached to the product for the detailed
accessories.
(*It only applies if the
No.
1
2
Name
Test lead of a male BNC connector to (2)
BNC to 4mm Test 4mm connectors. It is a kind of special line
for assisting automobile Scopebox to test
Leads
various types of signals. 4mm connectors
are coded in two colors: black (earth
wire) and red (positive pole which should
be connected with the 6-way Breakout
Leads). Moreover, it can also work with
the 20:1 Attenuator.
Each lead has 6 blades wired to 6 sockets,
allowing you to insert it between a plug
and socket pair, other ends are 6 (4 mm)
6-way Breakout
sockets which can be connected to the
Leads
BNC to 4mm Test Lead.
With these 6-way leads, you will be able to
test most of the sensors and actuators on
all makes and models of vehicle, including
MAP, temperature, thro le posi on and
airfl ow sensors, fuel pumps, primary
igni on circuits and fuel injectors.
User's Manual
PAD V
Description
73