Launch X-431 PAD V User Manual page 102

LAUNCH
Appendix - FAQ
1. Communication error with vehicle ECU?
Please confi rm:
1. Whether the VCI is properly connected.
2. Whether the vehicle ignition switch is ON.
3. If all checks are normal, send vehicle year, make, model and VIN
number to us using Feedback feature.
2. Failed to enter into vehicle ECU system?
Please confi rm:
1. Whether the vehicle is equipped with the system.
2. Whether the VCI is correctly connected.
3. Whether the vehicle ignition switch is ON.
4. If all checks are normal, send vehicle year, make, model and VIN
number to us using Feedback feature.
3. Can I use any other power adaptor other than the included
power adaptor to charge the tablet?
No. Please use only the included power adaptor to charge the tablet.
We assume no responsibility for damage or loss resulting from the use
of the any other adaptors.
4. How to save power?
• Please turn off the screen while the device keeps idle.
• Set a shorter standby time.
• Decrease the brightness of the screen.
• If WLAN connection is not required, please turn it off.
98
• Disable GPS function if GPS service is not in use.
5. How to reset the tablet?
*Warning: Resetting may cause data loss. Before doing so, please make sure
important data and information has been backed up.
There are 2 methods available to reset the tablet:
Method 1
1. Ensure the tablet is in ON mode.
2. Select "Tablet Setting" on the Home screen.
3. Select "Backup & reset".
4. Tap "Factory data reset".
5. Tap "RESET TABLET" to confi rm.
Method 2
1. Ensure the tablet is in OFF mode.
2. Hold and press VOLUME - key and POWER key until the tablet
enters system boot mode.
3. Use the VOLUME + / VOLUME - key to switch to system recovery
mode and press POWER key to confi rm.
4. Use the VOLUME + / VOLUME - key to move the highlight bar on
"wipe data / factory reset" and press POWER key to confi rm.
5. Press VOLUME + / VOLUME - to select "yes" and press POWER
key to confi rm.
6. Select "reboot system now" and press POWER key to restart the
system.
7. After resetting is complete, follow the on-screen instructions to
fi nish the system settings.
User's Manual
PAD V