Launch X-431 PAD V User Manual page 73

LAUNCH
*Notes:
• Please start the engine before test.
• It is unnecessary to perform this test after finishing battery health test,
but battery test must be done before undergoing this test.
Follow the steps below to proceed:
1. Tap "Charging Health Test" on the battery main menu, the following
operation tips will pop up on the screen.
2. Start the engine and tap "OK" to charge the battery.
3. After detecting the charging voltage and diode ripple, tap "Next" to
go to the next step.
4. Follow the prompts on the screen to increase the speed to 2500
RPM and keep for 5 seconds. Tap "OK", the screen will display the
test result.
User's Manual
PAD V
69