Table of Contents
Advertisement
Preparing for Flight
If the database has expired, the AV8OR 3D navigational component will still
operate normally. However, the aeronautical information will no longer be
valid and may not be accurate.
3.
Acknowledge the status of the database by pressing any hardware button on
the tablet PC.
After you acknowledge the status of the database, the tablet PC will establish a
connection to the INU. Once the connection is made between the two units, the
AV8OR 3D application displays the current status of the GPS signal acquisition.
The INU requires the tracking of at least three satellite signals. Once this occurs,
the tablet PC will indicate that GPS signals are being acquired and that the unit is
ready for use. On the front of the INU, all three status LEDs will light.
The INU is optimized for in-flight use. Static testing on the ground may produce
Note:
unreliable behavior.
18
DRAFT
AV8OR 3D User Guide
Advertisement
Table of Contents
