Table of Contents
Advertisement
Using the Simulator Mode
To control the aircraft:
1.
In the Simulator pop-up window, use the stylus to move the "Control Stick"
icon and simulate the aircraft attitude: turn, descend and climb.
Note:
Touching the "Control Stick" closer to bottom of the stick provides smaller,
graduated movements. At any time, you can level the aircraft by pressing the
Reset button at the top of the simulator pop-up window.
2.
To control the aircraft speed, use the stylus to move the slide bar up and
down.
You can also control the overall simulation speed by setting the "Simulation
rate" on the INU/Simu tab in the Setup dialog.
You can reset the simulation by using the stylus to touch the Reset button.
To stop the simulation:
1.
Press the Menu button to display the Menu.
2.
Select the Cfg button to display the Setup dialog.
3.
Press the Stop button in the Simulation area.
52
DRAFT
AV8OR 3D User Guide
Advertisement
Table of Contents
