Change From Multi-Product Display To Dedicated Display; Change From Dedicated Display To Multi-Product Display; Display With Different Setpoint Temperatures - Henny Penny GVE-071 Operator's Manual

3-8
CHANGE FROM
MULTIPRODUCT
DISPLAY TO A
DEDICATED DISPLAY
3-9
CHANGE FROM
DEDICATED DISPLAY
TO A MULTI-PRODUCT
DISPLAY
3-10
CHANGE FROM MULTI-
PRODUCT DISPLAY
TO A MULTI-PRODUCT
DISPLAY WITH
DIFFERENT SET-POINT
TEMPERATURES
July 2014
The display shows "---- ----" if in the Multi-Product Display Mode and
can be changed to a dedicated display.
1.
Press a product button, for ex:
2.
The display shows "FR FRIES" if the set-point of the vat matches
the product, or the display shows "<<<< >>>>" if it doesn't.
3.
Press and hold a timer button
control beeps.
4.
Release the timer button and display shows "FR FRIES", indicating
the change has been made to the Dedicated Display Mode.
This procedure is simple, and always works (will not be rejected) be-
cause it never tries to change the set-point temperature.
1.
Press and hold a timer button
control beeps.
2.
Release the timer button and display shows "---- ----", indicating
the change has been made to the Multi-product Display Mode.
Only products programmed for this set-point temperature will be able to be
selected for cooking.
1.
Press a product button, for ex:
2.
The display shows "FR FRIES" if the set-point of the vat matches
the product, or the display shows "<<<< >>>>" if it doesn't.
3.
Press and hold a timer button
control beeps.
4.
Release the timer button and display shows "FR FRIES", indicating
the change has been made to the Dedicated Display Mode.
5.
Press and hold a timer button
control beeps.
6.
Release the timer button and display shows "---- ----", indicating
the change was made to the Multi-Product Display Mode, using the
set-point of french fries, in this example.
18
.
or for 5 seconds until
or for 5 seconds until
.
or for 5 seconds until
or for 5 seconds until