Removing The Machine - Konica Minolta bizhub C352 Installation Manual

Note:
• Keep the Harness for the Dehumidifier Heater
at hand. It is necessary for mounting the Dehu-
midifier Heater.
• Keep the IR left cover and Decorative cover at
hand. They are necessary for mounting the
Reverse Automatic Document Feeder.
• Keep the Label (Super G3 Label) at hand. It is
necessary for mounting the FAX Kit.
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
V. Removing the Machine
1. Open the shipping carton and remove the IU car-
ton and machine carton.
2. Pull out the handles.
3. Holding onto the portions shown in the illustra-
tion, remove the machine while maintaining a
level position.
Note:
Machine mass: 103 kg/227 lb
Make available collective manpower of an appro-
priate size for transporting the machine.
Install the Drawer Cover furnished with the Paper
Feed Cabinet (1 or 2 Way Paper Feed Cabinet)
first before attaching the machine to Paper Feed
Cabinet. (two screws furnished with the Paper
Feed Cabinet)
When attaching the machine, as the reference fit
the machine with the corner A and B of the Paper
Feed Cabinet.
A
Drawer Cover
E-3
B
9J06IXC002DA
9J06IXC003DA
4061IXC119DA