Installing The User's Guide Holder - Konica Minolta bizhub C352 Installation Manual

X. Installing the User's Guide Holder
Install the user's guide holder.
XI. Mounting the Original Cover
Install the Original Cover.
XII. Adjusting Touch Panel
1. Turn ON the Main Power Switch and then Sub
Power Switch.
Note:
Turning power ON will display the screen below.
Ignore the message and proceed to the step 2.
4038IXC026DA
2. Press the accessibility key.
3. Touch "Touch Panel Adj."
9J06IXC019DA
4. Using a ballpoint or similar device, lightly touch
the center of the + markers at four places on the
Touch Panel.
(Any specific marker can be the first one.)
Note:
Pressing the touch panel hard may cause dam-
age.
* When all the markers at four places have been
touched, the start key turns green and lights up
steadily green.
5. Press the start key.
6. Touch "Close."
E-8
9J06IXE141DA
9J06IXE196DA
4037IXE530DA