Konica Minolta bizhub C352 Installation Manual page 5

VII. Installing the IU
1. Open the front door.
2. Tilt the IU to the left and, in that condition, shake it
over a small stroke twice. Then, tilt the IU to the
right and, in that condition, shake it over a small
stroke twice.
Note:
Shake the IU adequately. Otherwise, it may cause
trouble.
3. Remove the top cap of the IU.
4. Keeping the IU in the level position, insert it all
the way as far as it will go.
Note:
• Make sure that the color is same between
inserting port and the IU.
• Make sure that the blue label position of the IU
is matched with the one of the machine side.
9J06IXC009DA
5. Lift up the IU handle and pull out the photo con-
ductor sheet slowly holding the IU.
4062MXC002HB
6. Push the IU all the way in.
Note:
Make sure that the IU is pushed all the way in.
9J06IXC137DA
7. Using the same procedure, install all IUs.
E-5
9J06IXC010DA
9J06IXC011DA
9J06IXC012DA