Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch SCT 141 Series Initial Operation Instruction

en 18 | SCT 141x | Symbols used
1.

Symbols used

1.1

In the documentation

1.1.1 Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol
Consequences of hazard in the event of failu-
re to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observan-
ce:
Key word Probability of
occurrence
DANGER Immediate impen-
ding danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-

result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
|
1 690 386 065 2017-09-29
Severity of danger if inst-
ructions not observed
Death or severe injury
Death or severe injury
Minor injury
2.

User instructions

2.1

Important information

Setup and initial commissioning may only be performed
by qualified and trained customer service personnel
of the Robert Bosch GmbH or organizations commissi-
oned by the Robert Bosch GmbH. No warranty claims
will be accepted if the devices have been set up or
commissioned by unauthorized personnel.
2.2

Related documents

R
Original operating instructions
DAS 800/1000 (VAS 6430) – 1 690 386 012
R
SCT 141x original operating instructions – 1 690 386
063
R
SCT 410 original operating instructions – 1 690 386
066
R
P-Assist S5 original operating instructions – 1 690 386
038
R
DAS 800/1000 important information – 1 690 386 059
R
Online help software
2.3

Prerequisites

R
FWA 46xx+ 3D as of software version v5.0b351 or
FWA 44xx+ CCD as of software version v5.0b353
R
DAS 800/1000 (VAS 6430) adjustment tool
R
Level measurement bay:
$
The inclination of the entire test system may not
exceed ±1,5 %.
$
The unevenness of the measurement bay of the
SCT 141x may not exceed 1 mm.
$
The unevenness of the resting surface of the
vehicle is 10 mm.
R
Vehicle-specific calibration boards
R
Multi-Target-Shop short instructions
R
Protective hood 1 690 382 389 (see scope of deli-
very) attached when working with the SCT 141x on
the DAS 800/1000 (VAS 6430)
R
No direct sunlight or background lighting behind the
DAS 800/1000 (VAS 6430) or the SCT 410
R
Passenger car manufacturer information
R
TSS case (1 690 381 417) with 2 reference boards
and a tested line laser
Robert Bosch GmbH