Pump Overview; Drive Assembly And Control Panel; External Control; Motor Features - Pentair INTELLIFLO Installation And User Manual

The IntelliFlo Variable Speed Pump can be
®
conservation for a variety of inground pools.
• The pump can operate from 450 RPM to 3450 RPM
with four preset speeds of 750, 1500, 2350 and 3110
RPM
• The pump can be adjusted from the control panel to
run at any speed between 450 RPM to 3450 RPM for
different applications
• Up to 8 programmable speeds
• Pump control panel alarm LED and error messages
warn the user against under and over voltage, high
temperature, over current and freezing
• Communicates with EasyTouch, IntelliTouch or
SunTouch control systems or an IntelliComm
communication center via a two-wire RS-485 cable
connection
• Programmable priming mode with automatic detection
of prime for easy start-up
•
jet action spas
• UL/CUL/NSF
The IntelliFlo pump drive is designed to produce
the motor's rotational speed by controlling the frequency
of the supplied current. It also protects the motor and
pump from operating outside of their intended operating
parameters.
The control panel can be mounted on the pump in four
different directions in order to provide the user the best
access. The control panel can also be mounted in a more
convenient location with the help of the keypad relocation
kit (P/N 356904Z).
Operator Control Panel Cover
Buttons and LED (Beneath)
Strain Relief Port
for Incoming AC Power
Motor Stand
Variable Speed Drive Assembly
IntelliTouch , EasyTouch
®
and IntelliComm Communication Centers can remotely
®
control the IntelliFlo pump. The pump's communications
address and other functions are accessible from the
pump's control panel.
• RS-485 communication cable included
• IntelliTouch systems control 8 IntelliFlo pumps using
8 speeds per pump.
• EasyTouch systems control 2 IntelliFlo pumps using
8 speeds per pump.
• SunTouch systems control one IntelliFlo pump using
8 speeds.
• IntelliComm systems control one IntelliFlo pump
using the 4 External Control programs.
•
Synchronous Motor (PMSM)
• Superior speed control
• Operates at lower temperatures due to high
• Designed to withstand outdoor environment
• Totally Enclosed Fan Cooled (TEFC) Motor
• 56 Square Flange
• Low noise
• Active Power Factor Correction
• UL 60730 Compliant
• Rotatable Keypad
• Easy Overhead Wiring
• High Dr
Communication port for connection
to automation systems or
communication centers via two-wire
RS-485 cable (not shown)
INTELLIFLO Variable Speed Pump Installation and User's Guide
®

PUMP OVERVIEW

, SunTouch Control Systems
® ®
ermanent Magnet
1