Table of Contents
Advertisement
The Sparus
Pump with Constant Flow Technology
™
can be programmed to run at specific speeds and time
intervals for maximum operating efficiency and energy
conservation for a variety of bodies of water.
•
The pump can operate from 1100 RPM to 3450 RPM
with four preset flow rates of 40, 50, 60 and 70 GPM
•
The pump can be adjusted from the control panel to
run at any speed between 1100 RPM to 3450 RPM
for different applications, and flow from 20-140 GPM
•
Up to 8 programmable speeds/flows
•
Pump control panel alarm LED and error messages
warn the user against under and over voltage, high
temperature, over current and freeze protection
•
Self-priming for easy start-up
•
UL/CUL
Drive Assembly and Control Panel
The pump drive assembly consists of an operator control
panel and the system electronics that drive the motor. The
drive microprocessor controls the motor by changing the
frequency of the current it receives, as well as changing
the voltage to control the rotational speed.
Operator Control Panel,
AC Power Connection
Compartment
Buttons and LED
Motor Stand
Pump Drive Assembly
Motor Features
•
Permanent Magnet Synchronous Motor (PMSM)
•
High efficiency (3450 RPM 92% and 1100 RPM
90%)
•
Superior speed control
•
Operates at lower temperatures due to high
efficiency
•
Same technology as deployed in hybrid electric
vehicles
•
Designed to withstand outdoor environment
•
Totally enclosed fan cooled motor
•
Three-phase motor
•
56 Square Flange
•
Six-Pole
•
Low noise
SPARUS
Pump with Constant Flow Technology Installation and User's Guide
™
PUMP OVERVIEW
1
Advertisement
Table of Contents
