Advertisement
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
57
M6400669
58
A8800137
© Volvo Car Corporation
Check that the two springs (1) are in position
Press the two connectors for the sender cables for the airbag
into the steering wheel module.
Note!
The wiring must be routed through the existing holder (2).
Insert the two pins on the reverse of the steering wheel module
in the two springs. Ensure that the sender cables are unimpeded
Press the steering wheel module into the mountings. Two clicks
should be heard.
Turn the ignition key to position II
Reconnect the battery negative lead
Reinstall the cargo compartment carpet
Program the software according to the service information in
VIDA.
Navigation system (RTI)- 30660446 - V1.0
Page 35 / 35
Advertisement
