Advertisement
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
27
M3703401
28
D3703404
© Volvo Car Corporation
Route the wiring (1):
out along the right-hand side of the cable duct (2) and under the
wiring which is connected there. Remove the connectors if
necessary
up along the top of the wheel arch and out through the hole at
the top of the wheel arch
down along the wheel arch. Position the wiring as illustrated.
Connection in the fuse holder
Connection in the fuse holder
Remove the rear electronic module (REM). First open the catch
(1) on the top of the module. Fold the module forward. Lift the
module from the mountings (2).
Navigation system (RTI)- 30660446 - V1.0
Page 20 / 35
Advertisement
