Advertisement
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
48
M6400668
49
M6400670
© Volvo Car Corporation
Installing, keypad in the steering wheel
Turn the steering wheel 90º to the position illustrated, so that the
two holes on the reverse of the steering wheel are accessible.
Insert a screwdriver in the hole on the reverse of the steering
wheel, at right angles to the rear surface of the steering wheel
Insert a screwdriver as far as possible to determine the position
of the end of the spring clip (1)
Position the end of the screwdriver on top of the spring clip
Pry the screwdriver upwards towards the upper edge of the hole
(2) until the spring releases and one side of the steering wheel
module springs out and releases from the mounting
Turn the steering wheel 180º. Carry out the procedure on the
other side
Turn the steering wheel to the straight ahead position.
Navigation system (RTI)- 30660446 - V1.0
Page 31 / 35
Advertisement
