Advertisement
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
54
M3903757
55
M3903758
56
© Volvo Car Corporation
Tighten the keypad and cover around the spoke. Use the
screws.
Position the horn as illustrated
Connect the installed keypad connector to the reverse of the
keypad on the right-hand side of the horn. The cable from the
installed keypad is extremely short and the connector is difficult
to connect.
Reinstall the horn, according to the reversed order of operation
51. Ensure that the three springs are correctly positioned. Check
that the ground lead is not trapped
Tighten the screws alternately. Tighten to 6.5 Nm (5 lbf.ft)
Reinstall the ground lead. Tighten the ground lead
Connect the connector for the horn and the keypads
Check the function of the horn. Press the horn all the way
around its circumference.
Navigation system (RTI)- 30660446 - V1.0
Page 34 / 35
Advertisement
