Chapter 1 Important Safety Instruction - XYZ Printing da Vinci 2.0 Duo User Manual

Hide thumbs Also See for da Vinci 2.0 Duo:
Table of Contents

Advertisement

User Manual da Vinci 2.0 Duo
Chapter 1. Important Safety Instruction
Please read this manual carefully before operating the printer. The following warnings and attention
notices are a best effort attempt to cover all scenarios; unfortunately it is not possible to do so. In
the case of performing maintenance procedures that are not described in this manual the burden
of safety falls to the customer side.
For basic safety and precautions adhere to the following:
Warning
● Do not let children operate this device without adult supervision. Electric shock hazard. Moving pars can
cause serious injury.
● Do not place the printer on an unbalanced or unstable surface. Printer may fall or tumble causing harm
and/or injury. Printer may fall or tumble causing harm and/or injury.
● Do not place any objects on top of the printer. Liquids and objects that fall into the printer can lead to
printer damage or safety risks.
● Do not use fl ammable chemicals or alcohol wipes to clean this device.
● Do not disassemble or replace the printer cover with none XYZprinter covers.
● Do not touch heated surfaces during or after operation. Heated surfaces can cause severe burns.
● Insert and secure the power cord fi rmly for proper usage and to avoid potential electricity and fi re dangers.
● Do not attempt to service the printer beyond the instructions specified in this document. In the case of
irrecoverable problem, contact XYZprinting service center or your sales representative.
Attention
● Please place and use the printer in a well ventilated area. The process of heating the fi lament will produce
a small amount of non-toxic odor. Having a well ventilated area will ensure a more comfortable
environment.
● This printer is only to be used with fi lament specifi ed by XYZprinting.
● Make sure to set the power switch to the off position and remove the power cord before transporting the
device.
● Some components of the printer are moving during operation. Do not attempt to touch or change anything
inside before power off the printer.
P 4
w w w . e k t
. c o m
2
Katrangi
Electronics
Trading

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents