XYZ Printing da Vinci 2.0 Duo User Manual page 6

User Manual da Vinci 2.0 Duo
Cartridge Slot
Remove the
packaging supports
USB Port
Power Switc h
Power
Connector
Display Panel: Information on printer status.
Extruder Module: a print module which heats the filament to molten state, and pull the melted
fi lament out through nozzle for printing.
Z-Axis Rod: a rod which moves the print bed vertically during printing.
Front Door: a door enclosing the working space; should only be opened during operating or
maintenance.
Print Bed: Provides a fl at surface to lay the 3D model.
Cartridge Slot: a space for loading fi lament cartridge.
USB Port: a port for connecting USB cable.
Power Switch: a swtich for turning on/off the power of the printer.
Power Connector: a connector for connecting the power cord.
Attention
Once the 3D printer is turned off, wait at least 3 seconds before turning it on again.
．User Quick Guide
．Glue Stick
．Software CD
P 6
．Cartridge Locker x2
．Filament Cartridge x2
．Decorative Plate x2
w w w . e k t
． Scraper
． Copper Brush
． Cleaning Wire x5
. c o m
2
Control Panel
Display Panel
Extruder Module
Z-Axis
Front Door
Print Bed
Remove the
print bed fixing
screws and
printing module
fixers
．USB Cable
．Power Cord
Katrangi
Electronics Trading