5-1.4 Build Sample - XYZ Printing da Vinci 2.0 Duo User Manual

User Manual da Vinci 2.0 Duo

5-1.4 BUILD SAMPLE

P 16
Apply glue to the print bed before printing. The area
for where the glue needs to be applied is determined by
where the object is to be printed.
Remove the printed object when the print bed has descended.
Cover a damp cloth on the print bed (while cold) for 2~3 minutes.
Then wipe the moistened glue from the print bed with the damp
cloth gently.
w w w . e k t
1.Select a sample to be printed.
2.Select "YES" and the printer will
start to print.
3.Printing progress provides the
following information.
● BUILDING : fi nished percentage.
● TIME PASS : elapsed build time
● ESTIMENTD : estimation of build
time.
. c o m
2
Katrangi
Electronics Trading