Important Safety Notes - XYZ Printing da Vinci 1.0 Pro User Manual

da Vinci 1.0 Pro
Product Description
Open the box
Open the box and
1
remove the accessories
and the cushion
Packing support x2
Open the upper cover and remove
4
fixities listed above
Tape x2
Packing support x2
Pay attention particularly to actual paperboard
removal of the fixities listed above
Be sure to remove the fixing foam from
9
the axis

Important Safety Notes

•
Do not use the printer in dust rich, highly humid or outdoor environments.
•
Do not use the printer on a soft or tilt table to prevent the machine from falling, which may result in damage or personal injury.
•
Do not put your hand into the machine during operation to avoid collision risk due to movement of the machine or to avoid burn
due to high temperature.
P 4
Note: Please removal all fixed materials before turning on the printer to prevent the
machine from damage
2
Use the grip to take
off the machine
Tape x2
Cable tie x1
Cable tie x1
6
Remove the fixing
styrofoam beside the bed
Be sure to remove the
cable tie as illustrated
above
Remove all fixing tapes and
3
the packing bag
5
Remove 2 foams at the front of the cardboard
Remove fixing
7
paperboard
Do not cut this
11
white cable tie.
Remove bottom screw and the
8
fixing screw on the bottom of
the bed
12
Insert the bundled
software CD into the
computer and install the
software according to
instruction
Use the USB cable to
connect the printer to PC.
Connect the power cord
to the printer then turn on
the power switch
V.1.3