Table of Contents
Advertisement
Powering on the display
1. Turn on or switch off the display by flipping the power switch, located inside the compartment on the top.
Placing an object inside the display
Removing one of the optics
1. Remove the plastic corner from the optics.
2. Gently remove one of the optics. We recommend using appropriate gloves and suction cups for handling glass.
Important! Make sure to protect each corner of the optics when removing it from the support rail, to avoid
damaging the optics.
3. Place your physical object and test that the video content looks correct.
4. Place the optics back again and mount the plastic corner to lock it in place.
7
Advertisement
Table of Contents
