Realfiction DEEPFRAME Assembly Manual
  1. Manuals
  2. Brands
  3. Realfiction Manuals
  4. Monitor
  5. DEEPFRAME BASIC
  6. Assembly manual

Realfiction DEEPFRAME Assembly Manual

Hide thumbs Also See for DEEPFRAME:
Table of Contents

Advertisement

Quick Links

Download this manual
DEEPFRAME - ASSEMBLY GUIDE
VERSION 1.1 - ORIGINAL ASSEMBLY GUIDE
It is important to read this manual before using the DeepFrame, and to follow advices and instructions on safety,
operation and general use to get the best possible experience with your DeepFrame. DeepFrame is a revolutionary
new type of mixed reality display that enables digital content to appear as a hologram on top of reality seen
through the lens. The window-like display consists of a high-precision optical lens that can be mounted on the
floor stand (optional accessory) or hang suspended in wires.
The DeepFrame is patent-pending. Realfiction and DeepFrame are registered trademarks owned by Realfiction ApS.
1

Advertisement

Table of Contents
loading

Related Manuals for Realfiction DEEPFRAME

Summary of Contents for Realfiction DEEPFRAME

  • Page 1 VERSION 1.1 - ORIGINAL ASSEMBLY GUIDE It is important to read this manual before using the DeepFrame, and to follow advices and instructions on safety, operation and general use to get the best possible experience with your DeepFrame. DeepFrame is a revolutionary new type of mixed reality display that enables digital content to appear as a hologram on top of reality seen through the lens.

  • Page 2: Table Of Contents

    Content: When receiving the DeepFrame Setup time and persons needed Assembling the DeepFrame Assembling the floor stand for DeepFrame Basic Kit Attaching the DeepFrame Optic to the floor stand Assembling the OLED mount Attaching your VESA mount Attaching the OLED screen to the OLED mount...

  • Page 3: When Receiving The Deepframe

    WHEN RECEIVING THE DEEPFRAME Please note that DeepFrame needs to be combined with an HD or 4K screen (not included) for projecting the digital content through the optical lens. We recommend using a 65” 4K curved OLED screen together with the OLED mount kit (optional accessory).

  • Page 4: Setup Time And Persons Needed

    Setup time and persons needed Setting up the display can be done by 2 persons in around 2 hour.

  • Page 5: Assembling The Deepframe

    You can of course also choose to purchase a complete DeepFrame setup. 2. When looking at the DeepFrame Optical Lens it is worth noticing that the inside is the most delicate part, which means it should be taken very good care of.

  • Page 6: Assembling The Floor Stand For Deepframe Basic Kit

    6. You’ll also see additional holes for attaching other types of mounting solutions if needed, as well as main grip for your hands. ASSEMBLING THE FLOOR STAND FOR DEEPFRAME BASIC KIT 1. Open the flight case and begin by taking out each of the floor stand legs one by one.
  • Page 7 2. Attach the connector blocks on each side and fasten with the small screws using an umbraco key. Make sure the screws are tightly fastened. 3. Adjust the feet to make sure the stand is correctly balanced. 4. Attach the security clamps on the bottom of the stand to lock the positioning of the legs in place.

  • Page 8: Attaching The Deepframe Optic To The Floor Stand

    Important: We recommend being 3 persons for this. 5. When the floor stand has been assembled, flip the flight case around to reveal the DeepFrame Optical Lens. 6. Gently lift out the Optical Lens Optic and rest in on a sheet of protective foam on the floor.

  • Page 9: Assembling The Oled Mount

    8. Rotate the Optical Lens until you reach the right positioning, and then tighten the locks to secure it in place. Important: If you are installing DeepFrame in public spaces where people can potentially touch the display, we always recommend installing an extra safety device to prevent the locks from opening by accident.
  • Page 10 3. Place the 2 side sections on the left and right side and make sure the notches on each side section matches the notches on the curved sections. 4. Take the first side section and slide it on top, to fit the right side of the 2 curved sections. Fasten with 3 short screws in each end.

  • Page 11: Attaching Your Vesa Mount

    7. Raise the OLED Mount Kit upwards and the attach the stabilizer inside, with the flat side towards you. Attach it with 1 screw for the top and bottom. Attaching your Vesa mount 8. Flip the OLED Mount around so the curved side faces downwards, so the Vesa Mount Holder is visible. 9.
  • Page 12 10. Then click the flat panel bracket in place and securely lock it in place by tightening the screws. 11. Now, lift the OLED Mount in place on the OLED Stand. You can easily adjust the tilting if needed. 13. When you are satisfied, remember to secure it in place by pushing down on the lock.

  • Page 13: Attaching The Oled Screen To The Oled Mount

    ATTACHING THE OLED SCREEN TO THE OLED MOUNT 1. Open the box holding OLED Screen and remove the Styrofoam sides. 2. On the backside of the OLED Screen, guide the bracket through the bottom of the T-hole first and then slide it up and out towards the corner of the screen.
  • Page 14 4. When both sides are hinged in place, guide the screws through the holes and fasten with the wing nuts and washers to secure it in place, one side at a time. 5. Mount the 2 Corner Protectors on each side using 2 screws on the side and one from below.
  • Page 15 5. Locate the Sound Bar and lift it in place on the OLED Floor Stand 6. Then mount the optional Top Protector 7. Take the Connection Cable and mount it to the Sound Bar. Fasten with the 2 small black screws. Beware not to pull the cable towards you as this might damage the part where the cable connects to the screen.

  • Page 16: Assembling The Oled Housing

    ASSEMBLING THE OLED HOUSING 1. Unpack all the parts and place them on a sheet of protective foam on the floor. Please note that all the screws needed for assembling are already fitted. For fast assembling, we recommend not removing the screws or fittings. 2.
  • Page 17 5. Lift the other side frame in place on top and lock it in place. 6. Now, place the OLED Housing with the top plate facing upwards. 7. Attach the fabric sides by pushing the rubber seam into the groove on the side frames and front. For each side, start with the corners and progress to the middle of the fabric until it is completely attached and stretched.
  • Page 18 8. To remove the fabric sides again use the little pull-tab. 9. When ordering the OLED Housing you can upload your own artwork for the fabric sides, and also re-order new ones when needed Assembly is now finished. Please see the user manual for how to operate the display.
  • Page 19 Realfiction and Dreamoc are registered trademarks owned by Realfiction ApS. Other marks may be mentioned here in that belong to other companies. © 2018 Realfcition Aps. All rights reserved. Realfiction Aps | Øster Alle 42, 7th floor | DK-2100 Copenhagen Ø Denmark | Phone: +45 70 20 64 90...

Table of Contents