Table of Contents
Advertisement
Trouble shooting
Problem
1
No power
2
LED lamp is off or
blinking.
3
Film is lacking or not
playing at all.
4
The video images is out
of scale/alignment.
Action
•
Make sure the AC outlet has power.
•
Make sure that the power cable is properly inserted.
•
Check that the on/off (I/O) button is at I.
•
Open the bottom chamber and check connections.
•
Check power - see above.
•
Check wire connections from chamber through LED driver to LED
lamp.
•
Replace driver.
•
Boot the Dreamoc Diamond by turning the power switch off and
on again.
•
If the movies have been copied to the SD-card with a Mac
computer, you need to read: "How to solve the playback issue
when using Mac." Check for incorrect use of file names or file type.
Check that the screen has power and is turned on.
•
Take out, format and reload the SD card as described under
"Changing video content."
•
Replace the SD card with a new one.
•
Boot the Dreamoc Diamond by turning the power switch off and
on again.
•
Ensure that Screen adjustment, picture size is set-up for original
ratio.
12
Advertisement
Table of Contents
