Hdbase T; Control Interfaces - Barco Balder Series User Manual

Getting started
Parameter
Return loss
Impedance

3.1.2.5 HDBase T

Specifications
Parameter
Reference specification
Connector
Signal characteristics
Max. cable length (1080p/48b/60Hz)
Max TMDS Clock Frequency
Max video resolution supported
HDCP Pass-Through
IR Extension
RS-232 Extension
10/100Mbps Ethernet Pass-Through
Fallback to 100BaseTx, IEEE 802.3u
USB Over Centre Tap
Power Over Ethernet
Audio
LEDs - HD Base Status

3.1.3 Control interfaces

About
The following control interfaces are available on the projector:
• 1x RS-232 (for projector control)
• 1x LAN/Ethernet (for projector control
• 3x USB-A ports
Overview
•
RS-232
•
LAN/Ethernet
•
USB-A port
36 601–0443 /03 Balder
12G-SDI
-6dB @ 12GHz
75 ohm resistive
3G-SDI
>10dB at 3GHz
75 ohm resistive
Value
HDBaseT 1.0 Specification, June 2010
Standard RJ-45, 8P8C
HDBaseT
100 m (Cat5e/6), Pixel Clock <=225HHz, Video
Datarate <=5.3Gbps
70 m (Cat5e/6), Pixel Clock >225HHz, Video
Datarate >5.3Gbps
100 m (Cat6a/7), Pixel Clock >225HHz, Video
Datarate >5.3Gbps
270 MHz
1920x1200 @60Hz (WUXGA 60Hz)
Yes, from Source to Projector
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
Operation: Green, Left
Link/Mode: Yellow, Right