Remote Control; Remote Control, Battery Installation - Barco Balder Series User Manual

1
Image 2-3
Item
Name
No.
1 LCD Display
2 Navigation keys
3 Menu button
4 Standby
5 Back
6 OSD ON/OFF
7 Input
8 Shutter
9 Test Patterns
10 Lens

2.8 Remote Control

2.8.1 Remote control, Battery installation

Where to find the batteries for the remote control ?
The batteries are not placed in the remote control unit to avoid control operation in its package, resulting in a
shorter battery life time. At delivery the batteries can be found in a separated bag attached to the remote
control unit. Before using your remote control, install the batteries first.
How to install
1. Push the battery cover tab with the fingernail a little backwards (1) and pull, at the same time, the cover
upwards (2).
2
Description
Shows Projector status and navigation menu.
Navigation arrows (up, down, left, right), confirm selection (✓)
Toggle between OSD / Information menu.
Power on / standby
Undo action / back to previous screen.
Deactivate the On Screen Display (OSD). Only critical warnings will be
displayed.
Shortcut to input source menu on LCD. Use navigation keys to select and
enable input.
Enable and disable the lens shutter function. This is not a mechanical shutter,
but it toggles the laser source on and off. Backlight is red when the shutter are
enabled.
Shortcut to test pattern menu on LCD. Use navigation keys to select the desired
pattern.
Shortcut to lens function. A test pattern displays on the OSD. LCD screen
displays the navigation keys to manage and confirm actions.
Getting to know the projector.
3
10 9 8
4
5
6
7
601–0443 /03 Balder 23