Table of Contents
Advertisement
1.800.561.8187
Overview
CAUTION: Do not store instrument or its sensors with solvents or
products that contain solvents.
CAUTION:
Except for sensor and battery replacement, this
analyzer should only be opened and/or serviced by authorized
Bacharach personnel. Failure to comply may void the warranty.
HAZARDOUS AREA WARNING: This instrument has not been
designed to be intrinsically safe for use in areas classified as
hazardous locations. For your safety, DO NOT use it in hazardous
(classified) locations.
CAUTION: Do not use flammable or combustible substances (like
carburetor fluid used for cleaning the probe) near an open flame.
CAUTION: When the instrument is used in an inefficient oil-fueled
appliance where there is a high emission of soot, the probe's
sample filter may become clogged. Before every use check the
filter to confirm it is clean or replace it with a new filter.
To prevent soot intake and a clogged filter, a smoke test should be
performed before operating under such conditions. This ensures
that the furnace or boiler is burning at a level appropriate for the
use of this instrument.
When the CO
level exceeds the allowable threshold, a warning
2
will prompt the user to consider performing a smoke test. This
screen is cleared by pressing the ENTER button. Once the warning
is cleared, it will not be displayed again for that particular test. If
a new test is started (by pressing the HOLD button), the warning
will be displayed again if the limit has been exceeded.
NOTE: The Fyrite InTech CO sensor output is cross-sensitive to H2
and NO (when the NOx Filter Kit, PN 0024-1505 is not used).
2
www.
Fyrite
InTech
0024-9486 Rev 4
information@itm.com
.com
Manual
Advertisement
Table of Contents
