Table of Contents
Advertisement
1.800.561.8187
Fyrite
InTech
Manual
Diagnostics Menu
0024-9486 Rev 4
www.
Function
In this case:
Note the 3-digit date code on the new sensor
Replace the O
sensor
2
Press F3 to change and verify sensor date code.
Resetting the Sensor Date Code
Use the LEFT () and RIGHT () arrow buttons to
move the cursor horizontally to select between the
2-digit month code (00-12) and the one digit year code
(0-9 corresponding to the last digit of the manufacture
year) that make up the 3-digit date code.
Use UP () and DOWN () arrow buttons to
increment and decrement the selected field's value.
When finished, press ENTER to save the changes.
NOTE: Entering a value of 000 (three
zeros) disables this feature.
Next, verify the current month and year. Use the arrow
keys to edit the current month and year (if needed) and
press ENTER to confirm.
.com
Configuration
37
information@itm.com
Advertisement
Table of Contents
