Removing The Lamp Unit - Barco R9841810 Installation Manual

3. Removing the old lamp

3.2 Removing the Lamp Unit.

What has to be done
The lamp unit has to be slid out of the projector frame.
Necessary tools
Flatblade screwdriver of 5mm or Nutdriver of 8mm.
Sliding out the lamp unit
1. Loosen the 3 spacer screws (A) on the lamp house.
Image 3-3
Loosening the spacer screws
2. Using the provided handle (B), pull the lamp unit out of the projector frame.
Image 3-4
Sliding out the lamp housing
Caution: Be careful not to drop the lamp unit (see safety instructions in front of instruction manual)
6
A
A
B
A
B
R5976544 UNIVERSAL LAMP REPLACEMENT KIT 04/01/2005