Notes On Mounting The Bearing / Reassembling The Cassette Carriage - Ricoh Ri 100 Manual

Notes on Mounting the Bearing / Reassembling the Cassette Carriage

1. When mounting the bearing on the shaft, mount it with the flanged side face down.
[A]: Flanged side face down (OK)
[B]: Flanged side face up (Not OK)
2. When reattaching the upper part of the cassette carriage, make sure that the bearing is seated in
the housing hole.
[A]: The bearing is seated in the housing hole. (OK)
[B]: The bearing is not seated in the housing hole. (Not OK)
Motors, Bearing Race
89