Tru-Test XRS Service Manual page 19

SRS and XRS EID Stick Reader
EziLink remembers which port it connected on so that it won‟t ever have to search again.
Note: Turn on the stick reader before you start EziLink so that it‟s ready to be found. If you turn on the
stick reader more than a minute after starting EziLink, EziLink may resume searching the COM ports.
This can be prevented by setting EziLink to use a fixed COM port in Tools, EziLink Options, SRS/XRS
Connection. Set the COM port to the one that the Bluetooth driver has assigned as the outgoing COM
port.
Issue 2, 02/2013 19