Sub-Base For Transmitted Light And Cold Light Source - Leica S Series User Manual

Sub-base for Transmitted Light and Cold Light Source

1. Remove the glass stage plate.
2. Pull the locking mechanism forward.
3. Set the incident-light stand to the sub-base
for transmitted light and engage it with the
connection screw.
S Series User Manual
4. Press the locking mechanism backward.
The incident light base and the sub-base
for transmitted light are now connected.
5. Insert the glass stage plate.
Assembly
6. Insert the universal light guide in the
opening at the rear.
Additional information can be found in
the user manual for cold-light source
Leica KL300 LED.
19