HDMI Mode – Capturing Images Without a Computer or Without a Wireless
Device
In order to use this mode, you need a SD
card with enough free memory. If the
SD card is full, you will not be able to capture
any images – a corresponding message will be
shown.
Be sure the camera is connected to a
power source.
S Series User Manual
1. The status light blinks green. Wait until the
status light stopped flashing and one of the
mode button's is also green. This may take
approximately 30 seconds.
Get Set!
2. If a mode other than HDMI is lit green, press
the mode switch and wait until both the
status LED and the LED next to the HDMI
mode panel stop flashing.
48