Ethernet Mode - Capturing And Adjusting Images Using A Network - Leica S Series User Manual

Ethernet Mode – Capturing and Adjusting Images Using a Network
1. Connect one end of an Ethernet cable to
the camera and the other end of the cable
to the Ethernet connection in your facility.
2. The status light blinks green. Wait until the
status light stopped flashing and one of the
mode buttons is also green. This may take
approximately 30 seconds.
S Series User Manual
3. If a mode button other than Ethernet mode
is lit green, then press the mode button
and wait until both the status LED and
the Ethernet LED mode button stopped
flashing.
4. Follow the directions of your network
compatible device to connect to your
facilities network and select the camera.
5. Open the appropriate app on your mobile
device or appropriate software on your PC
for viewing, capturing, and adjusting the
camera image (see page 43).
Get Set! 51