Extend; How To Install The Coded Zoom - Leica S Series User Manual

How to Install the Coded Zoom

Scope of delivery
Coded zoom knob kit for S9 stereo microscopes:
Art. No.: 10 450 862
one coded zoom knob (for the left zoom
O
control)
USB cable to connect the coded knob with
O
a computer
These instructions describe the mounting
of the coded zoom knob with a cabled
connection to a computer. Leica recommends
to use the left side for mounting, as the right
knob has the values for the zoom range
imprinted. Most users will find it convenient to
operate the zoom on the right side.
S Series User Manual
Dismount the normal zoom knob on the left
1. Set the left zoom knob of the microscope to
the lowest magnification.
2. To install the coded knob you must
dismount the old knob on the left side. For
unscrewing use a 2.5 mm Allen key.

Extend!

Mount the coded knob and connect it to a
PC
1. Check the inside of the coded knob to
assure the position of the screw on the
lower, left side.

2. When you turn the knob you'll see the
screw through the hole.

53