Picture Settings - r.LiNK RL3-UCON8-LV Manual

Video-inserter with 2 video inputs,rear-view camera input and can control compatible with maserati vehicles with uconnect vp4-na and 8.4 inch monitor

Table of Contents

2.8.

Picture settings

The picture settings can be adjusted by the 3 buttons on the video-interface. Press the

button to open the OSD settings menu. To switch to the next menu item, pressing

and

DOWN

will change the selected value. The buttons are embedded in the housing to

avoid accidental changes during or after installation. The picture settings have to be done

separately, AV1 and AV2 while the corresponding input is selected and visible on the

monitor.

Note: The OSD menu is only shown when a working video source is connected to the

selected video-input of the interface.

The following settings are available:

Contrast

Brightness

Saturation

Position H (horizontal)

Position V (vertical)

For the rearIR-AV1 (out of function)

IR-AV2 (out of function)

Guide-lines left (out of function)

Guide-lines right (out of function)

Guide lines (ON/OFF) (out of function)

Version 12.09.2019

HW: CAM(V97)

RL3-UCON8-LV

Table of Contents