Interface Operation; Specifications - r.LiNK RL3-UCON8-LV Manual

3. Interface operation

The interface's enabled inputs can be switched by the external keypad.
Each press of the external keypad switches the input from factory mode to the inserted
video sources. If, by dip switch setting, all inputs are enabled, the order is the following:

Factory video video IN1
By dip switch deactivated inputs will be skipped. If an audio switch has been connected in
the system, also the audio signal will be switched when switching from video IN1 to video
IN2

4. Specifications

BATT/ACC range
Stand-by power drain
Power
Video input
Video input formats
RGB-video amplitude
Temperature range
Dimensions Video-Box
Dimensions daughter PCB
Version 12.09.2019
 
video IN2 factory video
HW: CAM(V97)

...
7V - 25V
10mA
140mA @12V
0.7V – 1V
NTSC
0.7V with 75 Ohm impedance
-40°C to +85°C
118 x 25 x 88 mm (W x H x D)
110 x 7 x 92 mm
RL3-UCON8-LV