Table of Contents
Advertisement
2.6.2.1.
Case 1: Video interface receives the reverse gear signal
If the interface delivers +12V on the green output wire of the 12pin interface cable while
reverse gear is engaged, the video interface will automatically switch to the rear-view
camera input
"Camera IN"
The 12 V power supply for the rear-view camera (max 3A) should be taken from the
green wire of the 20pin cable to avoid an unnecessary permanent power supply to
the camera electronic.
For the operation, both green cables
connected.
Version 12.09.2019
while the reverse gear is engaged.
"Reverse IN"
HW: CAM(V97)
and
"Reverse OUT"
have to stay
RL3-UCON8-LV
Advertisement
Table of Contents
