Table of Contents
Advertisement
2.6.
Connecting the Video sources
It is possible to connect two after-market Video-sources and one after-market rear-view
camera to the video-interface.
Before the final installation, we recommend a test-run of the interface. Due to changes in
the production of the vehicle manufacturer, there's always the possibility of
incompatibility.
Connect the female 12pin connector of the 12pin interface cable to the male 12pin
connector of the video-interface.
Connect the video RCA of the video source 1 and 2 to the female RCA connector
"Video IN1"
and
Connect the video RCA of the Rear-view camera to the female RCA connector
"Camera IN"
of the 12pin interface cable.
Version 12.09.2019
"Video IN 2"
of the 12pin interface cable.
HW: CAM(V97)
RL3-UCON8-LV
Advertisement
Table of Contents
