Checking The Interface Compatibility Of Vehicle And Accessories; Boxes And Connectors; Video-Interface - r.LiNK RL2-RLINK Manual

1.2. Checking the compatibility of vehicle and accessories
Requirements
Brand Compatible vehicles
Dokker since 2013-, Duster since 2014, Lodgy since
Dacia
2012, Logan since 2013, Sandero since 2012
Fiat Talento model year since 2016
Opel Movano since about 2016, Vivaro since about 2016
Captur model year since 2015, Clio model year
since 2014, Kangoo model year since 2014, Master
Renault model year since 2015, Megane model year since
2013, Trafic model year since 2015, Twingo model
year since 2013 and other vehicles with
ForTwo (C453/A453) since 09/2014, ForFour
Smart
(W453) since 08/2014, Brabus Versions since 2016
Limitations
Video only
Factory rear-view camera
1.3.

Boxes and connectors

1.3.1. Video-interface

The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options. Further it reads the vehicle's digital signals out of the vehicle's CAN-bus and
converts them for the video interface.
Version 22.08.2018
The interface inserts ONLY video signals into the infotainment.
For audio insertion factory-audio-AUX-input or a FM-modulator is required.
Automatic switch to factory rear-view camera only while reverse gear is
engaged. To delay the switch reset, additional electronics is required.
HW CAM(V31)/(V22)
Compatible systems
MediaNav
MediaNav
Navi 50 (MediaNav),
Navi 80 IntelliLink (Rlink)
R-Link, MediaNav
Smart Media System (R-Link)
RL2-RLINK