Table of Contents
Advertisement
Replace the humidifier cover (1), and then secure the cover with four screws (2).
6.
Open the water supply isolation valve on the HP POD 40c NA exterior.
7.
Connect the water supply line to the humidifier on the HP POD 40c NA exterior.
8.
Close the associated circuit breaker in the ECS cabinet.
9.
Press the power button on the outside of the humidifier to power up the humidifier.
10.
Humidistat
The humidistat is located in the cold aisle humidifier bump out.
You need a screwdriver and a flathead screwdriver for installation.
Removing the humidistat
Press the power button on the outside of the humidifier to power down the humidifier.
1.
Removal and replacement procedures 47
Advertisement
Table of Contents
