Table of Contents
Advertisement
Remove the three screws that secure the fan in the assembly (1), and then partially remove the fan by
4.
pulling it straight out (2).
Disconnect the wire.
5.
Remove the fan from the assembly.
6.
Replacing the fan
Connect the wire.
1.
Insert the fan into the assembly and push until the fan is fully seated (1).
2.
Secure the fan with three screws (2).
3.
Connect the power supplies to the fan power assembly.
4.
Return the fan bank to the AUTO mode of operation.
5.
Removal and replacement procedures 39
Advertisement
Table of Contents
Need help?
Do you have a question about the Performance Optimized Datacenter 40c North America and is the answer not in the manual?
Questions and answers