Ecs Touchscreen; Removing The Ecs Touchscreen - HP Performance Optimized Datacenter 40c North America Maintenance And Service Manual

ECS touchscreen

The ECS touchscreen is located on the door to the control panel inside the cold aisle of the HP POD 40c NA.
You need a screwdriver for installation.

Removing the ECS touchscreen

Disconnect the cables attached to the back of the ECS touchscreen.
1.
Remove the eight screws on the back of the door that secure the ECS touchscreen (1), and then push the
2.
ESC touchscreen through the front of the door to remove the ECS touchscreen (2).
Removal and replacement procedures 26