Table of Contents
Advertisement
Fan bank
There are three fan banks per cooling zone.
CAUTION:
a fan or fan bank.
You need a screwdriver for installation.
Removing the fan bank
Take manual control of the fan speed in the affected zone from the ECS panel.
1.
Set the fan speed to zero.
2.
Unseat both power supplies from the fan power assembly.
3.
Remove the fan bank wire harness (1).
4.
Remove the six screws that secure the fan bank (2).
5.
Power must be removed from the fan power assembly before removing or replacing
Removal and replacement procedures 40
Advertisement
Table of Contents
Need help?
Do you have a question about the Performance Optimized Datacenter 40c North America and is the answer not in the manual?
Questions and answers