Removing The External Chilled Water Flow Valve; Replacing The External Chilled Water Flow Valve; External Pressure Gauge Isolation Valve - HP Performance Optimized Datacenter 40c North America Maintenance And Service Manual

Removing the external chilled water flow valve

Remove the external chilled water flow actuator. For detailed instructions, see "Removing the external
1.
chilled water flow actuator (on page 33)."
Remove the eight bolts surrounding the valve (1), and then remove the valve (2).
2.

Replacing the external chilled water flow valve

Replace the valve (1), and then secure the valve with eight bolts (2).
1.
Replace the external chilled water flow actuator. For detailed instructions, see "Replacing the external
2.
chilled water flow actuator (on page 35)."

External pressure gauge isolation valve

The external pressure gauge isolation valve is located on top of the HP POD 40c NA.
Removal and replacement procedures 36