Response To Cpu/Master Stop - Siemens 3RK1308‑0 00‑0CP0 Series Equipment Manual

Functions

6.9 Response to CPU/master STOP

6.9 Response to CPU/master STOP
With this parameter, you set the response of the PIQ following a CPU STOP:
● Retain last value
The last received and valid value of the process image of the outputs is retained.
● Switch substitute value 0
The process image of the outputs is assigned the value "0". "Switch substitute value 0" is
active even if the header module of the ET 200SP station is deenergized.
Note
The response to CPU/master STOP is only relevant in "Automatic" mode.
102
Motor starter (3RK1308‑0**00‑0CP0)
Equipment Manual, 11/2019, A5E34821005002A/RS-AC/003