Advertisement
Step 7
Slide Back Panel (P10) into the grooves as shown.
Step 8
You will need
4 x Big Cam
Flat head
Nut (H2)
screwdriver
Position Top Panel (P1) onto Side Panel (P3) & (P4) and Back Panel (P10).
Make sure the Back Panel (P10) fits into the groove under Top Panel (P1).
Insert 4 x Big Cam Nuts (H2) into Side Panels (P3) & (P4) and turn clockwise to lock.
www.fantasticfurniture.com.au
(P10)
(P2)
(P3)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P4)
(P10)
(P3)
(P1)
(P4)
PAGE 8
Advertisement
