Advertisement
Step 1
You will need
4 x Big Cam
Phillips head
Bolt (H1)
screwdriver
Screw 4 x Big Cam Bolts (H1) into Top Panel (P1) as shown.
Step 2
You will need
2 x Big Cam
2 x Big Wood
Bolt (H1)
Dowel (H4)
4 x Slide
6 x Screw
(H15)
(H7)
Phillips head
Mallet
screwdriver
Insert 2 x Big Wood Dowels (H4) into Left Side Panel (P3).
Screw 2 x Big Cam Bolts (H1) into Left Side Panel (P3).
Attach 2 x Slide Tracks (H15-1) onto Left Side Panel (P3) with 6 x Screws (H7).
www.fantasticfurniture.com.au
Separate the Slide Runners (H15-2) and Slide Tracks (H15-1) from Slide
(H15) by following the steps below:
Extend the Slide Runner all the way forward.
Press the plastic release lever of the slide down and pull the Slide Runner
(H15-2) completely out.
PAGE 5
Advertisement
