Advertisement
Step 13
You will need
4 x Small
Phillips head
Cam Nut (H9)
screwdriver
Position Drawer Front (P5) onto Drawer Sides (P6) & (P7).
Rotate 1x Small Cam Nut (H9) so the arrow points towards the incoming cam bolt and insert the Small Cam Nut (H9)
into Drawer Side Panel (P6) or (P7).
Repeat with the remaining 1 x Small Cam Nut (H9).
Turn Small Cam Nuts (H9) clockwise to lock.
Repeat with other Drawer Front (P5).
Step 14
You will need
2 x Metal
4 x Screw
Handle (H11)
(H8)
Phillips head
screwdriver
Attach 1x Metal Handle (H11) onto each Drawer Front (P5) with
2x Screws (H8) using a Phillips head screwdriver.
Do not over-tighten the screws (H8).
www.fantasticfurniture.com.au
(P5)
(P9)
(P6)
(P5)
(P7)
PAGE 11
Advertisement
