13 - AIR SCOOP
6x40mm nylon bolt
.........2
1- Using the ABS air scoop as a template, draw around the outside edge with a pencil and then remove it.
2- Using a sharp hobby knife cut away the covering just inside the line, please do not cut into the wood.
3- Glue the ABS air scoop into position using CA adhesive.
4- Repeat the above steps for the ABS wing fairing.
14- INSTALLATION OF THE WING (1)
Front of wing locator
Plastic fairing
15- INSTALLATION OF THE WING (2)
Plastic air scoop
Wing fairing
CA
Cut away the covering inside the line before
installing the air scoop and wing cover
WING
BOTTOM
Plastic air scoop
Wing bolt mount
(Plywood)
Nylon wing bolt
BOTTOM VIEW
8
BOTTOM VIEW
15/32"
12mm
CA
Plastic M6 insert
6x40 plastic bolt