Caliper - Cub Cadet Challenger Series Service Manual

5. Install the brake pad (piston side)
(1)(with insulator and pad shim)
Align the projection (a) on the piston
•
side of the brake pad with the
groove in the caliper piston.
6. Install the brake pad holding bolts.
17Nm (1.7 m · kg,12 ft ·
lbs) Installing the Rear Brake

Caliper

1. Install the brake caliper with the
mounting bolts.
40Nm (4.0m · kg,29 ft · lbs)
• Brake hose(1)
• Copper washers
Union bolt(2)
•
48Nm (4.8m · kg,35 ft · lbs)
2. Tighten the union bolt while holding
the brake hose as shown in this
illustration.
Chassis
3. Bleed the brake system
4. Check for proper brake fluid level in
the reservoir.
•
5. Adjust the parking brake cable free
play.
5‐25
Above the minimum
level mark